Product Introduction:High Voltage 3 Phase Digital Microstep Stepper Drive for 86~130mm size motor current under 4.2A
ECON provides tens of models of stepper drives. From 2 phase to 3 phase, DSP digital, 24--80 DC input or 24--80VAC input, and can provide the right stepper drives to satisfy the special needs of your stepper control systems. ECON’s stepper products are well-known because of their wide choices, excellent performance, easy to use, high reliability, and low cost. The stepper drives have been used by thousands of OEM clients in the world from many of industries such as CNC machinery, medical, electronics, semiconductor, packaging, lab automation.
The high performance DH series digital stepper drives are featured with extra low noise, very low motor heating, and ultra smooth motor movements at low speed. With performance and cost balanced
DH3422MA is the new generation high performance fully digital stepper drive which base on 32bit DSP with a advanced algorithm .the power supply range is AC110~220V. it can drive frame 86-130mm 3 phase stepper motor .
Ultra low noise and high smoothness at middle/low speed ,and high torque at high speed, which can be applied to different speed control applications. adopt smooth and accurate sinusoidal current vector control technology ,which make motor low heat .
Product Features:High Voltage 3 Phase Digital Microstep Stepper Drive for 86~130mm size motor current under 4.2A
●new generation 32bit DSP
●good smoothness ,low noise ,low heat
●build-in micro step setting
●build-in current setting
●the standstill current can be set to 50%
●opto-isolated differential pulse input
●the response frequency is up to 300KHz
●over voltage , under voltage, over current protection
●support PU+DIR pulse mode and CW/CCW pulse mode
●Support 5V/24V signal (PU DR MF) input
Applications
It can be used in various kinds of machines ,such as cnc router, floating machine, packaging machine,3D printer, labeling machine, cnc milling/lathe, laser cut machine, and so on ,its unique features make it an ideal solution for the applications which require low noise ,low vibration, low heat and high precision
Mounting Dimension(unit:mm)
Product Function:High Voltage 3 Phase Digital Microstep Stepper Drive for 86~130mm size motor current under 4.2A
Current Setting
IM(A) |
1.2 |
1.4 |
1.6 |
1.8 |
2.0 |
2.2 |
2.4 |
2.6 |
2.8 |
3.0 |
3.2 |
3.4 |
3.6 |
3.8 |
4.0 |
4.2 |
D1 |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
D2 |
OFF |
OFF |
ON |
ON |
OFF |
OFF |
ON |
ON |
OFF |
OFF |
ON |
ON |
OFF |
OFF |
ON |
ON |
D3 |
OFF |
OFF |
OFF |
OFF |
ON |
ON |
ON |
ON |
OFF |
OFF |
OFF |
OFF |
ON |
ON |
ON |
ON |
D4 |
OFF |
OFF |
OFF |
OFF |
OFF |
OFF |
OFF |
OFF |
ON |
ON |
ON |
ON |
ON |
ON |
ON |
ON |
Working Modes
D9 |
OFF:PU+DIR pulse mode ON:CW/CCW pulse mode;note:set the mode after power off |
D10 |
OFF: receive external pulse ON: self-test ,after power on ,the motor run with 30RPM\ |
Microstep Setting
Pu/Rev |
400 |
500 |
600 |
800 |
1000 |
1200 |
2000 |
3000 |
4000 |
5000 |
6000 |
10000 |
12000 |
20000 |
30000 |
60000 |
|
D5 |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
|
D6 |
ON |
ON |
OFF |
OFF |
ON |
ON |
OFF |
OFF |
ON |
ON |
OFF |
OFF |
ON |
ON |
OFF |
OFF |
|
D7 |
ON |
ON |
ON |
ON |
OFF |
OFF |
OFF |
OFF |
ON |
ON |
ON |
ON |
OFF |
OFF |
OFF |
OFF |
|
D8 |
ON |
ON |
ON |
ON |
ON |
ON |
ON |
ON |
OFF |
OFF |
OFF |
OFF |
OFF |
OFF |
OFF |
OFF |
Interface Description
Name |
Function |
Description |
PWR |
Power light |
When power on ,the green light is on |
ALARM |
Over current/under voltage/over voltage displaying light |
If the drive Over current/under voltage/over voltage, the red light is on |
24PU+ |
24Vpulse input VCC |
Connect to 24V pulse VCC (support PLC 24V+ ) |
5PU+ |
5V pulse input VCC |
Connect to 5v pulse VCC |
PU- |
Pulse input negative |
Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, each falling edge active. In CW/CCW pulse mode,5PU and PU- are CW input |
24DR+ |
24V direction input VCC |
Connect to 24V pulse VCC (support PLC 24V+ ) |
5DR+ |
5Vdirection input VCC |
Connect to 5v pulse VCC |
DR- |
Direction input negative |
DIR signal: In single-pulse mode, this signal has low/high voltage levels, representing two directions of motor rotation; In CW/CCW pulse mode,5DR and DR- are CCW input |
24MF+ |
24V enable input VCC |
Connect to +24V signal power supply |
5MF+ |